Settings That Can Be Changed Or Confirmed While Printing - MUTOH ValueJet VJ-1204 Quick Reference

2. Press the [Menu] key on the operation panel.
• "Menu 1: Print Start" is displayed on the operation panel.
3. Press the [+] key or [–] key to change or confirm settings.
NOTE NOTE
• For the setting items whose settings can be changed or confirmed, refer to

"3.7.4.2 Settings that can be changed or confirmed while printing".

3.7.4.2

Settings that can be changed or confirmed while printing

NOTE NOTE
• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save the
setting that you changed.
If the printer returns to Normal without "Backup" being selected, the changed setting
is not saved.
Setup item
Print Start
Temperature
Pre Heater
Platen Heater
After Heater
PF Adjust
Backup
3 Basic usage
Setting
• [Enter] key: If the heater temperature does not reach
—
Pre Check the current Pre Heater temperature.
Platen Check the current Platen Heater temperature.
After Check the current After Heater temperature.
Off / 30 °C to 50 °C Change the Pre Heater temperature.
Off / 30 °C to 50 °C Change the Platen Heater temperature.
Off / 30 °C to 50 °C Change the After Heater temperature.
–20 pulse to 0 to 20 pulse Change the feed adjustment value.
— • [Enter] key: Save the changed setting.
• [Cancel] key: The printer returns to Normal.
—
VJ-1204 QUICK REFERENCE
Description
the set value during warming-up, printing starts.
3-25