Adding Redlink Accessories To Thermostat - Honeywell TH8320R1003 Vision Pro 8000 Product Data

®
VISIONPRO 8000 WITH REDLINK™
2. While the Press Connect message is displayed (listening
mode), press and quickly release the CONNECT button
on each new RedLINK accessory.
NOTE: For locations of CONNECT buttons on
RedLINK accessories, see "Locating the Con-
nect Buttons on RedLINK Accessories" begin-
ning on page 15.
Press Connect on
New Accessories.
Fig. 34. Thermostat in listening mode.
3. After a short delay (up to 15 seconds), check thermostat
to confirm the connection of each RedLINK accessory.
Touch or to review the list.
 
Outdoor Sensor
has been added
Fig. 35. Outdoor sensor added.
4. Touch Done at the thermostat after all new RedLINK
accessories are connected.
NOTE: Thermostat displays a countdown timer while in
the listening mode. If it detects no activity for 15
minutes, it exits listening mode.
Completing Initial Setup
5. Finish the setup by selecting the desired options. Touch
Done after you select the last option you want to change.
THERMOSTAT TYPE
programmable
Fig. 36. Thermostat type.
68-0312—01
The thermostat now displays its Home screen and the
thermostat setup is complete.
Adding RedLINK Accessories to the
Thermostat
If you want to add RedLINK accessories after the thermostat
has been setup, follow these steps.
1. Touch Menu.
2. Select Installer Options.
MCR33972
3. Enter password (date code) and touch Done. See "Find-
M34150
14
Fig. 37. Thermostat home screen.
Installer Options
Fig. 38.
ing Your Password (Date Code) to Access Installer
Options" beginning on page 18 for more information.
Enter password
0 0 0 0
Fig. 39.
M33985
MCR33976
MCR33977