Cleaning The Thermostat Screen; Setting Preferences; Security Settings; Clean Screen - Honeywell TH8320R1003 Vision Pro 8000 Product Data

®
VISIONPRO 8000 WITH REDLINK™
Temporary Boost: Touch

ventilation temporarily. To turn it off, set it to zero.
Run Ventilation For
60 minutes
Lockout: Touch or to select Yes or No, then touch Next.
 
Select Yes to prevent ventilation from running during the Sleep
or Unoccupied (commercial) program periods or when outdoor
conditions exceed values set by the installer.
Lockout in Sleep
Period:

Setting Preferences

Preference menu options let you select how the thermostat
displays information or responds to certain situations.
1. Touch MENU and select Preferences.
Preferences

Clean Screen

68-0312—01
or to select how long to run

MCR34136
Fig. 130.
No
MCR34137
Fig. 131.
MCR34100
Fig. 132.
MCR34170
Fig. 133.
2. Select an option and follow prompts:
• Reminders to change filters
• Fahrenheit/Celsius display
• 12/24-hour clock display
• Display Options
– Backlighting (Continuous or On Demand)
– Inactive Backlight (Backlight level while the screen
is not in use. Requires C wire and Backlighting
must be set to Continuous.)
– Screen Contrast
• Alert light options
• Scheduling options
• Adaptive recovery
• Default schedule
• Daylight saving time
Reminders
Fahrenheit/Celsius
3. Touch Done to save your settings. Touch Cancel to
ignore changes.

Cleaning the Thermostat Screen

When you select the Clean Screen option, the screen is locked
to prevent accidental changes to the thermostat while you
clean the screen.
1. Touch MENU.
2. Select Clean Screen. A prompt asks if you want to clean
the screen for 30 seconds.
Clean Screen

Security Settings

68
MCR34139
Fig. 134.
MCR34100
Fig. 135.
MCR34140
Fig. 136.