Honeywell TH8320R1003 Vision Pro 8000 Product Data page 54

®
VISIONPRO 8000 WITH REDLINK™
ISU Installer Setup
Number Name
1014 Vent During Hum Yes
or Dehum Calls
No
1016 Vent On High
Off
Indoor Humidity
On
1017 Ventilator Core
Off
Reminder
3, 6, 9, 12 Calendar Months
1017 Ventilator Filter Off
Reminder
3, 6, 9, 12 Calendar Months
1100 Number of UV 0, 1, 2
Devices
1105 UV Bulb 1 Off, 6, 12, 24 Calendar Months
Reminder
Note: "1" is not
displayed if there
is only 1 UV Bulb
1105 UV Bulb 2 Off, 6, 12, 24 Calendar Months
Reminder
1200 Custom
View / Edit Custom Reminders
Reminders
Add Custom Reminders
28 Backlighting
On Demand
Continuous
1400 Clock Format 12 hour
24 hour
1401 Daylight Saving Off
Time
On
68-0312—01
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
Yes
On
Off
Off
0
Off
Off
None
On Demand
12
On
54
Residential,
Commercial Requires
or Both EIM
Both No This feature is used to help reach the user's
desired humidity level by not allowing the
ventilation equipment to run during a call for
humidification or dehumidification.
Yes: Ventilation is allowed to run during a call
for humidification or dehumidification.
No: Ventilation is NOT allowed to run during a
call for humidification or dehumidification.
Both No This ISU is only displayed when ISU 1000
Ventilation Type is set to ERV / HRV.
Off: The humidity level has no effect on
ventilation.
On: The thermostat removes excess humidity
by turning on the ventilator when the indoor
humidity rises 10% above the user's
humidification setting. The thermostat must
be in the heat mode to ventilate on high
humidity.
Both No Ventilator Core Cleaning Reminder
Both No Ventilator Filter Cleaning Reminder
Both No Press the up/down arrows to select the
number of UV devices installed in the system.
Some systems may have two UV devices, one
for the A-Coil and another for Air Treatment. A
replacement reminder can be setup for each
one. Select 0 if no UV devices are installed.
Both No UV Bulb 1 Replacement Reminder
Both No UV Bulb 2 Replacement Reminder
Both No See "Customizable Reminders" beginning on
page 95.
Both No Select Continuous or On Demand
backlighting. Select Continuous backlighting if
you would like the backlight to be on all the
time (C wire is required for Continuous
backlighting).
Select On Demand backlighting if you would
like the backlight to only turn on after a key
press. After you complete your changes, the
screen stays lit for 16 seconds if the
thermostat is battery powered only or it stays
lit for 45 seconds if the thermostat is system
powered (C wire).
Both No
Both No Set to Off in areas that do not follow Daylight
Saving Time.
Notes