®
VISIONPRO
8000 WITH REDLINK™
8. See "To Use the MicroSD Card in the Thermostat" on
page 100.
To Use the MicroSD Card in the
Thermostat
1. Slide card into the bottom of thermostat. See Fig. 268.
2. Select the item to load or save.
68-0312—01
Scroll to see:
Installer Setup
Dealer Information
Holiday Schedule
Custom Reminders
Data Logs
Software Update
Fig. 269.
3. Follow the prompts on the screen.
• To add information from the card to the thermostat,
select Load from SD Card.
• To put thermostat information on the card, select Save
to SD Card.
4. When you are finished, touch Done, then Home, and
remove the microSD card.
100
Fig. 270.