Honeywell TH8320R1003 Vision Pro 8000 Product Data page 39

ISU Installer Setup
Number Name
409 Adaptive Recovery
No
Yes
410 Minimum Cool 50° F to 99° F
Setpoint
410 Maximum Heat 40° F to 90° F
Setpoint
411 Keypad Lockout Unlocked
Partially Locked
Fully Locked
412 Residential:
None
Entry / Exit
50° F to 99° F
Remote - Home
Cool Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit
Remote -
Occupied Cool
Setpoint
412 Residential:
None
Entry / Exit
40° F to 90° F
Remote - Home
Heat Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit
Remote -
Occupied Heat
Setpoint
413 Residential: None
Entry / Exit
50° F to 99° F
Remote - Away
Cool Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit
Remote -
Unoccupied Cool
Setpoint
Table 2. Installer Setup (ISU) Table. (Continued)
Settings Default
Yes
50° F
90° F
Unlocked
75° F
70° F
78° F
39
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Residential No No: The system will begin heating or cooling
recovery at the scheduled time.
Yes: The thermostat will begin heating or
cooling recovery early to ensure that the
temperature is reached at the scheduled time.
The thermostat will adjust the start time of the
equipment based on how quickly the
scheduled temperature was reached on
previous days. See page 70 for more
information on Adaptive Intelligent Recovery.
Both No The user cannot set the temperature below
this level.
Both No The user cannot set the temperature above
this level.
Both No Unlocked: User has access to all thermostat
settings.
Partially Locked: User can modify only
temperature settings.
Fully Locked: User cannot modify any
settings.
Both No The thermostat maintains this Cool setting
when the user presses Home / Occupied at the
Entry / Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See
"Wireless Entry/Exit Remote" beginning on
page 109.
Both No The thermostat maintains this Heat setting
when the user presses Home / Occupied at the
Entry / Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See
"Wireless Entry/Exit Remote" beginning on
page 109.
Both No The thermostat maintains this Cool setting
when the user presses Away / Unoccupied at
the Entry / Exit Remote. Select None to delete
this temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See
"Wireless Entry/Exit Remote" beginning on
page 109.
®
8000 WITH REDLINK™
Notes
68-0312—01