Hyundai 2008 Elantra Neos Body Repair Manual page 90

BODY PANEL REPAIR PROCEDURE
10. Drill out all the spotwelds attaching the front side sill
outer panel section.
11. Remove the front side sill outer panel section.
12. Measure and mark the cutline on side sill outer
reinforcement as indicated in the illustration.
BEDBP6307C
BFDBP6308
130mm
BFDBP6308A
13. Cut the side sill outer reinforcement along the cutline.
NOTE
When cutting side sill outer reinforcement, take care
not to cut through mating flanges.
14. To remove the front pillar outer panel, drill out all
spotwelds and laser welds.
BP-25
BFDBP6308B
BFDBP6306A
BFDBP6309