BODY PANEL REPAIR PROCEDURE
18. Apply the two-part epoxy primer to the interior of the
center pillar.
19. Apply an anti-corrosion agent to the welded parts and
interior of the center pillar (Refer to the CORROSION
PROTECTION).
20. Prepare exterior surfaces for priming, using wax and
grease remover.
21. Apply metal conditioner and water rinse.
22. Apply conversion coating and water rinse.
23. Apply the two-part epoxy primer.
24. Apply the correct seam sealer to all joints carefully
(Refer to the BODY SEALING LOCATIONS).
BEDBP6513C
BEDBP6513D
BP-45