Hyundai 2008 Elantra Neos Body Repair Manual page 105

BP-40
22. Measure and mark the vertical cutlines on rear side
sill outer panel 55mm and 155mm from the rear door
step trim mounting hole.
100mm
23. Cut the rear side sill outer panel along the cutlines.
NOTE
When cutting rear side sill outer panel, take care not
to cut through mating flanges or side sill outer
reinforcement.
24. Drill out all spotwelds attaching the rear side sill outer
55mm
BFDBP6508A
25. Remove the rear side sill outer panel.
26. Measure and mark the cutline on side sill outer
BEDBP6508B
BODY PANEL REPAIR PROCEDURE
panel section.
reinforcement as indicated in the illustration.
BEDBP6508C
BFDBP6509
105mm
BFDBP6509A