Removal - Hyundai 2008 Elantra Neos Body Repair Manual

BODY PANEL REPAIR PROCEDURE

REMOVAL

1. To remove the front pillar, drill out and grind away all
spotwelds and plug welds attaching the cowl side upper
outer panel.
NOTE
If the cowl side upper outer panel is reusable, be careful
not to damage it while removing.
2. Remove the cowl side upper outer panel.
3. Before cutting the front pillar, be sure to support roof
panel.
4. Measure and mark the each cutline on the front pillar
outer panel 150mm and 270mm from the roof panel
corner as indicated in the illustration.
5. Cut the front pillar outer panel along the cutlines.
BFDBP6303
When cutting the front pillar outer panel, take care not
to cut through mating flanges or front pillar outer
reinforcement.
BEDBP6321
NOTE
BP-23
BFDBP6305
BFDBP6305A