Hyundai 2008 Elantra Neos Body Repair Manual page 73

BP-8
5. Determine a cutting method
a) Cutting a spot welded area
Make a hole in the middle of spot welded area
with a punch, remove welded area using a spot
cutter and remove using a chisel.
b) Removing brazed area
Remove using a torch and wire brush, and chisel.
c) Removing arc welded area
Remove plug welded area using a disk grinder
and chisel.
BVQBP6014
BFDBP6015
BVQBP6016
BODY PANEL REPAIR PROCEDURE