BODY PANEL REPAIR PROCEDURE
INSTALLATION
1.
Transcribe the fender apron upper inner panel cutline
to the new fender apron upper inner panel, cut to length
and chamfer butt end to improve weld surface.
2. Fit and clamp the fender apron upper inner panel in place.
3.
Measure each measurement point (Refer to the BODY
DIMENSIONS) and correct the installation position.
4.
MIG butt weld all seams.
5.
Clean and prepare all welds, and remove all residue.
BFDBP6106D
BFDBP6106E
6.
After removing, apply the welding primer.
BFDBP6106F
BP-15
BFDBP6106G
BFDBP6106H
BFDBP6105A