GENERAL INFORMATION
GI-7
FOR BEST RESULTS
REMOVAL
Measuring dimensions before beginning
Measure the dimensions of the damaged area according to the body dimension drawings before removing and repairing.
Adjust dimensions with body frame adjuster if deformed.
Selecting cutting area
Select a cutting area that is easily accessible and that is prone to the least amount of distortion when welding.
Select an area that would allow the new part to overlap repair area by 30~50 mm (1.2~2.0 in) .
Protecting body from damage
Secure the body with clamps and jacks to prevent damage to the body when working on it.
BFDGI6005