Hyundai 2008 Elantra Neos Body Repair Manual page 82

BODY PANEL REPAIR PROCEDURE
13. Fit and clamp the fender apron inner panel assembly
in place.
14. MIG plug weld all holes.
15. Clean and prepare all welds, and remove all residue.
16. Apply the two part epoxy primer to the interior of the
each panel.
17. Apply an anti-corrosion agent as required.
(Refer to the BODY CORROSION PROTECTION)
18. Prepare the exterior surfaces for priming using wax
and grease remover.
19. Apply metal conditioner and water rinse.
20. Apply conversion coating and water rinse.
21. Apply the two-part epoxy primer.
BFDBP6102A
22. Apply the correct seam sealer to all joints carefully.
(Refer to the BODY SEALING LOCATIONS)
BFDBP6102B
BFDBP6102C
BP-17
BFDBP6102D
BFDBP6102E