Hyundai 2008 Elantra Neos Body Repair Manual page 86

BODY PANEL REPAIR PROCEDURE
4. MIG plug weld all holes and MIG butt weld seams.
5. Clean and prepare all welds, and remove all residue.
6. Apply the two part epoxy primer to the interior of the
each panel.
7. Apply an anti-corrosion agent as required.
(Refer to the BODY CORROSION PROTECTION)
8. Prepare the exterior surfaces for priming using wax
and grease remover.
9. Apply metal conditioner and water rinse.
10. Apply conversion coating and water rinse.
11. Apply the two-part epoxy primer.
BEDBP6203D
12. Apply the correct seam sealer to all joints carefully.
(Refer to the BODY SEALING LOCATIONS)
BFDBP6203C
13. Install the front crash member assembly.
BP-21
BFDBP6203E
BEDBP6202B
BEDBP6201A