Hyundai 2008 Elantra Neos Body Repair Manual page 102

BODY PANEL REPAIR PROCEDURE
9. Remove the center pillar outer reinforcement section.
10. Measure and mark the horizontal cutline on rear door
hinge mounting upper reinforcement as indicated in
the illustration.
BFDBP6504
150mm
BFDBP6504A
11. Cut the rear door hinge mounting upper reinforcement
along the cutline.
NOTE
When cutting rear door hinge mounting upper
reinforcement, take care not to cut through mating
flanges.
12. Measure and mark the vertical cutlines on front side
sill outer panel 35mm and 135mm from the front door
step trim mounting hole.
35mm
BP-37
BFDBP6504B
100mm
BFDBP6505