BODY PANEL REPAIR PROCEDURE
7.
After removing, apply the welding primer.
8.
Fit and clamp the new back complete panel assembly
in place.
9.
Measure each measurement point (Refer to the BODY
DIMENSIONS) and correct the installation position.
10. MIG plug weld all holes.
BFDBP6706C
11. Clean and prepare all welds, remove all residue.
BFDBP6709
12. After removing, apply the welding primer.
BFDBP6702B
BP-59
BFDBP6702C
BFDBP6702D
BFDBP6701A