Removal - Hyundai 2008 Elantra Neos Body Repair Manual

BODY PANEL REPAIR PROCEDURE

REMOVAL

1. Before cutting center pillar, be sure to support roof
panel.
2. Measure and mark the horizontal cutlines on center
pillar outer panel as indicated in the illustration.
3.
BEDBP6501
4.
100mm
100mm
BFDBP6502
Cut center pillar outer panel along the cutlines.
NOTE
When cutting center pillar outer panel, take care not
to cut through mating flanges or center pillar outer
reinforcement.
Drill out all spotwelds and laser welds, attaching the
center pillar outer panel.
BP-35
BFDBP6502A
BFDBP6502B