BP-14
4.
Remove the fender apron upper outer panel.
5.
Measure and mark the cutline on the fender apron upper
inner panel 290mm from front fender apron upper inner
panel end on the fender apron upper panel assembly
as shown in the illustration.
6.
Cut the fender apron upper inner panel along the cutline.
7.
Remove the fender apron upper inner panel.
8.
Prepare all surfaces to be welded.
BFDBP6105
9.
After removing, apply the welding primer.
BFDBP6106
BFDBP6106A
BODY PANEL REPAIR PROCEDURE
BFDBP6106B
BFDBP6106C