BODY PANEL REPAIR PROCEDURE
9.
Install the front pillar outer panel in place.
10. Measure each measurement point (Refer to the BODY
DIMENSIONS) and correct the installation position.
11. MIG plug weld all holes.
12. Clean and prepare all welds, and remove all residue.
13. After removing, apply the welding primer.
BEDBP6309A
14. Reattach the cut away front pillar outer panel section,
then MIG plug weld all holes and MIG butt weld seams.
BEDBP6309B
15. Clean all welds with a disc grinder.
BEDBP6309C
BP-29
BEDBP6309D
BEDBP6321A
BEDBP6321B