Hyundai 2008 Elantra Neos Body Repair Manual page 114

BODY PANEL REPAIR PROCEDURE
3. Apply body filler to the welded seam. Sand and finish.
Apply the two-part epoxy primer to the interior of the
quarter outer panel.
4. Fit and clamp the quarter outer panel in place.
5. Measure each measurement point (Refer to the BODY
DIMENSIONS) and correct the installation position.
6. MIG plug weld all holes and MIG butt weld seams.
7. Clean and prepare all welds, remove all residue.
8. Apply an anti-corrosion agent to the welded parts and
interior of the quarter outer panel (Refer to the
CORROSION PROTECTION).
9. Prepare exterior surfaces for priming, using wax and
BFDBP6601B grease remover.
10. Apply metal conditioner and water rinse.
11. Apply conversion coating and water rinse.
12. Apply the two-part epoxy primer.
BFDBP6601C
BP-49
BFDBP6601D
BFDBP6601E