Heat & Glo PRIMO60 Installation Manual page 60

NOTICE: Fasteners are not used with glass clip.
Figure 10.8 Position Glass Clip and Install Glass Panel
Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Installation Manual • 2310-970 Rev. L • 2/16
60
5. Break the barrier glass support into two pieces as shown
in Figures 10.9 and 10.10. Make the hand bends as
shown in Figure 10.11 to form the glass supports
BREAK LINE BREAK LINE
Figure 10.9. Barrier Glass Support
Figure 10.10. Break Barrier Glass Support
HAND BEND AT 90 DEGREES HAND BEND AT 90 DEGREES
Figure 10.11. Form Barrier Glass Support