Heat & Glo PRIMO60 Installation Manual page 16

TV Mounting - Standard Combustible Framing
PRIMO48 = 41-3/4 IN.
PRIMO60/72 = 47 IN.
Figure 3.10 Standard Combustible Framing

TV Mounting - Steel Header Framing
See "Good Faith Guidelines for TV Installations" in appliance owner's manual.
STEEL HEADER
*
Steel framing (above appliance) required below this line.
PRIMO48 = 41-3/4 IN.
PRIMO60/72 = 47 IN.
*
Steel framing must go to top of the standoff. Combustible header/stud can be used above standoff.
Figure 3.11 Framing with Steel Header

Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Installation Manual • 2310-970 Rev. L • 2/16
16
SHEETROCK WALL
COMBUSTIBLE
HEADER
WARNING! Risk of Fire! DO NOT operate appliance with standoffs removed!
STANDOFFS-May need to be relocated to
accommodate steel header. See Detail A.
-
Location depends on variables such as TV size,
bracket configuration, etc.
6 in. minimum distance must be met or exceeded
SHEETROCK WALL
TV
TV
=TV
=SHEETROCK WALL
=COMBUSTIBLE
HEADER/STUD
=TV
=SHEETROCK WALL
=STEEL HEADER
=COMBUSTIBLE
HEADER/STUD
6 IN. MIN.
DETAIL A
RELOCATE STANDOFF
RELOCATE STANDOFF
Standoffs may be moved toward center
of appliance to allow for steel header.
Standoffs MUST be reinstalled!