Heat & Glo PRIMO60 Installation Manual page 84

PVLP-SLP
Horizontally Terminated Power Vent
Optional Wire Harness
DESCRIPTION
10 ft. PV Wire Harness
20 ft. PV Wire Harness
40 ft. PV Wire Harness
60 ft. PV Wire Harness
80 ft. PV Wire Harness
100 ft. PV Wire Harness
PVLP-HS
Heat Shield
Figure 12.6 PVLP-SLP Power Vent Component
Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Installation Manual • 2310-970 Rev. L • 2/16
84
15-1/2 IN.
394 mm
14 IN.
356 mm
11-1/2 IN.
292 mm
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
PVLP-BEK
Brick Kit
6-1/4 IN.
159 mm
1-1/2 IN.
38 mm
8 IN.
203 mm
4-3/8 IN.
10 IN.
112 mm
254 mm
Note: Wire harnesses required to power the PVLP-SLP
connect to the appliance and are ordered separately from
PVLP-SLP. Contact your dealer to order.
Note: A PVLP-HS heat shield is available and sold
separately. Use if the PVLP-SLP is installed in a high traffi c
area.
12-1/2 IN.
318 mm
2-1/4 IN.
57 mm
4-3/4 IN.
121 mm
9-1/2 IN.
241 mm
5-1/4 IN.
135 mm
2-1/4 IN.
57 mm