Heat & Glo PRIMO60 Installation Manual page 69

3. Install right outside granite by aligning the bolts on the
back of the granite piece with bottom hole on granite
transition panel bracket. Insert the bolt* in the bottom
slot. See Figure 10.25. Align and slide toward outside
of appliance. Repeat with left side granite.
*Bolt detail: M6-1.00 x 25 Hex Head
INSERT BOLT* IN BOTTOM HOLE INSERT BOLT* IN BOTTOM HOLE
Figure 10.25. Install Side Granite Pieces
NOTICE! Verify the left and right side granite locations
before installing the top and bottom granite. See Figures
10.25, 10.27, 10.29.
Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Installation Manual • 2310-970 Rev. L • 2/16
SLIDE GRANITE TO OUTSIDE SLIDE GRANITE TO OUTSIDE
OF FIREPLACE OF FIREPLACE
Figure 10.26. Right Side Granite Piece Installed and Leveled
GRANITE TRANSITION BRACKET GRANITE TRANSITION BRACKET
1-1/8 INCH 1-1/8 INCH
LEFT SIDE GRANITE LEFT SIDE GRANITE
Figure 10.27. Verify Side Granite Reference Dimensions
NOTE: USE
LEVELING
BOLTS TO
STABILIZE
GRANITE
PIECES
3/4 IN. 3/4 IN.
69