Grill Set; Grill Set Installation; Grill Set Removal - kozy heat Dassel DSL-36-RF Installation And Operation Manual

UPPER LOUVER, HOOD & LOWER GRILL INSTALLATION
A. Align hooks (A) in the upper louver to slots
located in the fireplace face. Set down into
position.
B. Insert upper hood flange into clips located at the
top of the upper air passage.
NOTE: This is a fairly tight fit.
C. Partially thread the (2) screws (included in
components packet) into the nuts (B) at each end
of the lower grill. Secure to fireplace by threading
the screws into the corresponding holes in the
inside flange of the lower grill opening. The
lower grill can now be opened and closed to
access the gas valve and controls.
UPPER LOUVER, HOOD & LOWER GRILL REMOVAL
A. Use both hands to pull the hood out of upper air
passage clips.
B. Lift upper louver up and out of slots.
C. Remove screws securing the lower grill at each
end to remove from fireplace.
C
Thread screws into nuts on
each end of grill and secure to
lower grill opening.

GRILL SET

A
Upper hood clips
PAGE 43
Slide flange on upper
B
hood into clips in the
top of the upper air
passage opening.
NOTE:
STAND-OFF HEAT SHIELD
NOT SHOWN FOR CLARITY
PURPOSES ONLY.