UPPER LOUVER, HOOD & LOWER GRILL INSTALLATION & REMOVAL
INSTALLATION
A. Align hooks in the upper louver to slots located in the fire-
place face. Set down into position.
Thread screws into nuts on each
end of grill and secure to lower
grill opening.
C.
Partially thread the (2) screws (included in components
packet) into the nuts at each end of the lower grill. Secure to
fireplace by threading the screws into the corresponding holes
in the inside flange of the lower grill opening. The lower grill
can now be opened and closed to access the gas valve and
controls.
GRILL SET
B.
Insert upper hood flange into clips located at the top of the
upper air passage.
NOTE: THIS IS A FAIRLY TIGHT FIT.
REMOVAL
A. Use both hands to pull the hood out of upper air passage clips.
B.
Lift upper louver up and out of slots.
C.
Remove screws securing the lower grill at each end to remove
from fireplace.
PAGE 37
Slide flange on upper
hood into clips in the
top of the upper air
passage opening.
Upper hood clips