Grill Set Installation And Removal; Door Handle Installation - kozy heat Z-42 Installation And Operation Manual

7.2 Grill Set Installation and Removal

Sold separately.
7.2.1 Installation
1. Align the rods in the upper grill with the holes at the top of the
upper grill opening. Push the upper grill up until bottom clears
the face frame. Set down into holes at bottom of the upper grill
opening.
2. Remove the nuts from lower grill assembly and save. Align the
bolts with the lower grill hinge and insert bolt through the lower
grill hinges. Secure with nuts previously removed
7.2.2 Removal
1. Lift upper grill up and out of opening.
2. Remove nuts securing the lower grill to the lower grill hinges.
Remove the grill, and reattach nuts to the grill bolts.
HOLES AT TOP OF GRILL OPENING
HOLES AT BOTTOM OF GRILL OPENING
LOWER GRILL ATTACHMENT
Figure 7.6, Grill Set Installation and Removal
#Z-42 & #Z-42-CD R.15 November 2019

7.3 Door Handle Installation

SINGLE DOOR : There is a threaded handle in the components packet.
Install on threaded rod as shown in Figure 7.7 by turning the handle
clockwise until it is hand-tight.
CAST IRON DOOR: These are factory installed.
Figure 7.7, Threaded Rod
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces FIREPLACE SETUP 29