Glass Frame Assembly; Glass Frame Assembly Removal / Installation; Grill Set; Grill Set Installation / Removal - kozy heat DASSEL DSL-36 Installation And Operation Manual

WARNING: DO NOT OPERATE THIS FIREPLACE WITH THE GLASS FRONT REMOVED, CRACKED OR BROKEN.
REPLACEMENT OF THE GLASS SHOULD BE DONE BY A LICENSED OR QUALIFIED SERVICE PERSON.
CAUTION: TO PREVENT GLASS FRAME ASSEMBLY FROM FALLING FROM FIREPLACE AND BECOMING DAMAGED, FOLLOW THESE
INSTRUCTIONS EXACTLY WHEN REMOVING AND INSTALLING GLASS FRAME ASSEMBLY.
REMOVE GLASS FRAME ASSEMBLY
1. Locate spring-loaded handles securing glass frame assembly at top &
bottom of firebox.
2. Pull bottom handles out and down to release assembly bottom.
3. Pull top handles out and up to release assembly top.
D. Remove glass frame assembly from fireplace.
INSTALL GLASS FRAME ASSEMBLY
1. Place glass frame assembly onto fireplace front.
2. Pull top handles out and down to secure assembly top.
3. Pull bottom handles out and up to secure assembly bottom.
GRILL SET INSTALLATION
1
Figure 13b
1. Align hooks in upper louver to slots located in fireplace face. Set down into position.
2. Insert upper hood flange into clips located at top of upper air passage, keeping in mind this is a fairly tight fit.
3. Partially thread (2) screws (included in components packet) into nuts at each end of lower grill. Secure to fireplace by threading
screws into corresponding holes in inside flange of lower grill opening. The lower grill can now be opened and closed to access gas
valve and controls.
GRILL SET REMOVAL
1. Use both hands to pull hood out of upper air passage clips.
2. Lift upper louver up and out of slots.
3. Remove screws securing lower grill at each end to remove from fireplace.

GLASS FRAME ASSEMBLY

GRILL SET

2
Slide flange on upper hood into
clips in top of upper air passage
Upper hood
clips
Figure 13a
3
PAGE 13
Thread screws into nuts on
each end of grill and secure
to lower grill opening.