Modem Configuration - Adjusting The Dialing Parameters - FP ultimail Operator's Manual

98 ultimail Operator Manual
13.14 Modem configuration – adjusting the dialing parameters
Francotyp-Postalia customer service sets, during ultimail commissioning, correct
dialing parameters for the built-in modem. After moving to new premises or any
change of your phone equipment, you should check the settings and adjust them if
necessary.
SET UP
SYSTEM SETTINGS
MODEM
• Press the key to open the SET UP
menu.
• Select SYSTEM SETTINGS
MODEM.
The ADJUST MODEM
CONFIGURATION menu offers the
selection of possible parameter settings.
The table on page 99 shows and explains
the possible settings.
During setting procedure, all parameters
that are not technically reasonable do not
appear or further parameters are
displayed.
• Press the associated keys until all
required settings display the desired
values.
For seizing an outside line with
exchange digit:
Select EXCHANGE DIGIT to open the
menu for setting / editing the exchange
digit shown.
• Press SAVE to save the parameters.
• End the display of the new modem
settings with CONTINUE.