Manage Rate Tables; Load Rate Table; Delete Rate Table - FP ultimail Operator's Manual

13.10 Manage rate tables

The ultimail automatically monitors the validity of rate tables. When Canada Post
changes postage regulations, the ultimail receives a new rate table – in time and
without further input – when loading postage. The system clock controls the switch-
over to the valid rate table. Even when predating meter imprints, the ultimail checks
the validity of the rate table and, if necessary, activates the valid rate table for the
chosen date.

13.10.1 Load rate table

Additionally you can load a new rate table without loading postage. The ultimail can
save up to 2 rate tables. If you load another rate table, the ultimail will overwrite the
rate table which is currently not used.
EDIT POSTAGE TABLE DATA
UPDATE RATE TABLE

13.10.2 Delete rate table

Caution! You cannot select a rate table to be deleted. All rate tables saved
in the ultimail will be deleted.
Metering is impossible without valid rate table!
When deleting the rate tables, the memory items will be deleted as well.
EDIT POSTAGE TABLE DATA
DELETE ALL RATE TABLES
SET UP
SET UP
Advanced settings & system information
• Press the key to open the SET UP
menu.
• Select EDIT POSTAGE TABLE DATA
UPDATE RATE TABLE.
The ultimail loads the up-to-date rate
table from the data center.
• Press the key to open the SET UP
menu.
• Select EDIT POSTAGE TABLE DATA
DELETE ALL RATE TABLES.
• Confirm the security prompt with YES.
The ultimail deletes all stored rate tables.
You have to load a new rate table before
you can meter again.
93