Ultimail Operation Basics; Access Control By Master / User Card - FP ultimail Operator's Manual

14 ultimail Operator Manual
4

ultimail Operation Basics

In this chapter you will learn about the basic ultimail 60 and ultimail 120 functions and
how to handle the operating menu.
4.1

Access control by MASTER / USER card

The MASTER and USER cards, commonly referred to as access cards, control the
access rights to the postage meter.
A MASTER card allows access to all functions.
A USER card allows access to selected functions only:
– Metering to the assigned account
– Memory handling
– Assigning a logo to the current account.
For an overview of all access rights refer to page 154.
The authorization for metering can be set so that no access card is required.
Metering is then possible without access card on all accounts (see
Chapter 10.4 on page 69).
How to plug the access card into the
card reader
• Insert access card into the card reader
in the direction of the arrow. The chip
on the card should face downward.
• Push access card in as far as it goes.
You will feel the card snap in.
How to remove the access card
• Simply pull the access card out of the
card reader.