Changing The Origin Postal Code - FP ultimail Operator's Manual

106 ultimail Operator Manual

13.20 Changing the origin postal code

If you wish to use the ultimail elsewhere (e.g. after moving to new premises), you
must register the new location of your ultimail with Francotyp-Postalia.
At the new location you must load the new origin postal code by modem from the
TELESET data center.
SET UP
SYSTEM SETTINGS
MORE
MORE
MORE
CHANGE ZIP CODE/POSTAL CODE
• Make sure the ultimail is connected to
the phone line.
(The ultimail connects to the data
center during the procedure.)
• Press the key to open the SET UP
menu.
• Select SYSTEM SETTINGS
MORE MORE
ZIPCODE/POSTAL CODE.
Your ultimail now establishes a
connection with the TELESET data
center and loads the new origin postal
code.
MORE
CHANGE