FP ultimail Operator's Manual page 168

168 ultimail Operator Manual
Cleaning the print system
• Moisten a soft, fibreless cloth with de-
ionized water.
If you do not have de-ionized water at
hand, you can also use distilled or tap
water. Tap water contains minerals that
can leave deposits on the print heads
though.
• Hold the cartridge as shown in the
figure. The nozzles face down!
• Wipe the print head slowly and very
softly with the cloth in the direction of
the arrow. Repeat this procedure
several times.
The water will blend with ink residues on
the print head and clean the nozzles.
• Reinsert the ink cartridge.
• Remove the other ink cartridge and
clean it in the same manner.
• Reinsert the ink cartridge.
• Close the cartridge flap.
For details on removing and inserting the
ink cartridges, refer to pages 111 to 114.