Setting Letter Transport Run-On Time - FP ultimail Operator's Manual

13.13 Setting letter transport run-on time

The letter transport run-on time is the period from ejecting the last letter to letter
transport standstill.
LETTER TRANSPORT RUN-ON TIME
Selected run-on time
SET UP
SYSTEM SETTINGS
PRINT
Advanced settings & system information
• Press the key to open the SET UP
menu.
• Select SYSTEM SETTINGS
PRINT LETTER TRANSPORT
RUN-ON TIME.
• Adjust the run-on time with REDUCE or
INCREASE.
You can adjust run-on time between 7
and 29 seconds in steps of 1 second
each.
• Press SAVE to register the displayed
run-on time.
The letter transport run-on time is set and
maintained until the next change, even if
you switch the ultimail off.
97