Positioning Single Letters - FP ultimail Operator's Manual

6.3.3.2 Positioning single letters

Position large mail pieces and items that are not suited for stack processing,
individually and manually to the feeder.
Letter guide face
Letter transport starts automatically when
the sensor recognizes the letter stack.
The feeder separates the letters
individually from the stack, moistens the
flap (if seal function is switched on) and
transfers the letter to the metering
machine. The metered letter is placed in
the catch tray.
As soon as the feeder is empty, the
ultimail stops.
Press down moistened envelope flaps
We recommend that you firmly press on
the envelope flaps after metering to make
sure the envelopes are well sealed.
• Stroke your hand firmly over the
envelope's / letter stack's flap area.
• Place the letter on the belt conveyor so
that:
– the envelope flap is face down
– the side to be printed is face up
(address field is visible)
– the upper edge is flush to the letter
guide face.
• Push the letter in direction of the arrow
until the letter sensor detects the letter
and starts the letter transport.
Metering 45