Switching The Ultimail On / Off - FP ultimail Operator's Manual

12 ultimail Operator Manual
3

Switching the ultimail ON / OFF

Use the power switch on the back of the
postage meter to switch the ultimail and
installed optional system components
ON / OFF.
Switching on
• Switch the power switch on the back
of the postage meter to the
The display light goes on and a start
routine is initialized. The self-test is
accompanied by signalling beeps and
information on display. The ultimail
checks and activates all system
components and loads the data. This
procedure takes some time.
The home menu appears in the display.
The ultimail is ready for operation.
Note:
The example shows the complete home
menu.
ACCOUNT only appears if an access
card (MASTER or USER) is plugged in or
if access control is switched off.
A postage value appears only if
– all necessary dispatch data have been
selected,
– the weight displayed exceeds 0 grams,
and
– an access card (MASTER or USER) is
plugged in or if access control is
switched off.
I
position.