Only Seal Letters (Optional) - FP ultimail Operator's Manual

52 ultimail Operator Manual
7.5 Only seal letters
You can seal letters with the feeder or the sealer without metering them.
(optional)
SET UP
MODE SETTING
ONLY TRANSPORT, NO PRINTING
Switch on sealer.
• Place the "seal envelope" switch to the
seal
rear into position.
The envelopes must be suited for
mechanical sealing (see page 176).
Make sure that the quality of the
envelopes used is a high one.
Setting "only transporting" mode
• Open the SET UP menu using the
key.
• Select MODE SETTING
ONLY TRANSPORT, NO PRINTING.
The ultimail returns to the home menu. In
the status line you see
MODE: ONLY TRANSPORTING.
• Position the letters, as usual, at the
sealer or feeder.
Press down moistened envelope flaps
We recommend that you firmly press on
the envelope flaps after metering to make
sure the envelopes are well sealed.
• Stroke your hand firmly over the
envelope's / letter stack's flap area.