Streaming - AMX NMX-ENC-1100 Instruction Manual

Web Configuration

Streaming

FIG. 28 displays the streaming controls on the NMX-ENC WebConsole page. The streaming controls allow you to set
the output format for the stream and whether the stream is unicast or multicast.
FIG. 28
Streaming tab
The following options are available in this area:
Streaming Options
Output Format
Unicast
Multicast
28
Select an output format from the menu. You can choose from RTP or UDP.
• UDP (User Datagram Protocol) allows transporting both MPEG-2 video and
audio inside a single stream that is encapsulated as part of a standard
MPEG-2 Transport Stream.
• RTP (Real-time Transport Protocol) defines a standardized packet format for
delivering audio and video over the Internet. By transferring video and audio
over separate streams, RTP allows audio only players to receive separated
content as their audio/video player counterparts receive it. Selecting RTP
activates the RTP Session Description Information options. Use these
options to describe the current stream. Click Save to save the information
you enter. This information is used in the Session Description Protocol
(SDP) used with RTP.
Click the Enable check box in this area to activate unicast. Uncheck the Enable
check box to enter the IP address and port. Check the Enable check box again
to save the values.
Note: You can only select unicast OR multicast for streaming. When one is
selected, you cannot select the other until the first option is unselected.
Click the Enable check box in this area to activate multicast. Uncheck the
Enable check box to enter the IP address and port. Check the Enable check
box again to save the values.
Instruction Manual - NMX-ENC H.264 Encoder