Cable Details And Pinout Information; Overview - AMX NMX-ENC-1100 Instruction Manual

Cable Details and Pinout Information

Overview

The DVI-I Input connector on the rear panel is used to connect video source input devices to the encoder (FIG. 23). The
encoder routes video from connected source input devices to the connected output device. Each connector supports DVI
as well as VGA, S-Video, Composite, and Component inputs.
FIG. 23 MULTI FORMAT VIDEO INPUTS port
To connect non-DVI input source devices (S-Video, Composite, VGA, and Component) to the MULTI FORMAT
VIDEO INPUTS connector, the following (optional) adapter cables are required:
DVI Input Adapter Cables
Name
CC-DVI-5BNCM
CC-DVI-RCA3M
CC-DVI-SVID
CC-DVIM-VGAF
Instruction Manual - NMX-ENC H.264 Encoder
Description
DVI-to-5 BNC Male
Note: Used for VGA, Component, or Composite
inputs. When used for composite inputs, connect the
green plug on the adapter cable to the composite
video output jack on the source device.
DVI-to-3 RCA Male
Note: Used for Component or Composite inputs.
When used for composite inputs, connect the green
plug on the adapter cable to the composite video
output jack on the source device.
DVI-to-S-Video
DVI-to-VGA (up to 1920x1200)
Cable Details and Pinout Information
Length FG#
6' (1.828m) FG10-2170-08
6' (1.828m) FG10-2170-09
9' (2.743m) FG10-2170-10
6' (1.828m) FG10-2170-13
15