Rear Panel Components; Sdi - AMX NMX-ENC-1100 Instruction Manual

Wiring and Device Connections

Rear Panel Components

The following section lists the components on the rear panel of the encoder. FIG. 8 displays the rear panel of the
NMX-ENC-1100.
(for video
input)
FIG. 8 NMX-ENC-1100 (rear panel)
FIG. 9 displays the rear panel of the NMX-ENC-1105.
FIG. 9 NMX-ENC-1105 (rear panel)

SDI

NMX-ENC-1105 model encoders feature two SDI connectors for video input/output. The SDI input can receive HDMI
non-HDCP video with 2 channel LPCM audio at 48 kHz sampling frequency. These ports support SD-SDI and HD-SDI.
The SDI connectors are as follows:


FIG. 10 SDI connectors
For a list of supported input resolutions for the SDI ports, see the SDI Supported Input Resolutions section on page 44.
8
DVI HDMI
AUDIO
(for video
output)
SDI
1 BNC connector for video input (INPUT)
1 BNC connector for video output (PASS THRU)
USB
RS-232 RELAYS
Instruction Manual - NMX-ENC H.264 Encoder
LAN (connect Port 1 to network)
POWER