Wiring and Device Connections
Overview
This section describes the front and rear panel components for the NMX-ENC-1100 and NMX-ENC-1105. Wiring
information for port connectors is listed in each connector's corresponding section.
Front Panel Components
The following section lists the components on the front panel of the NMX-ENC encoder.
FIG. 3
NMX-ENC (front panel)
LEDs
All LEDs appear in green or red, and in solid or blinking states. Consult the LED States table on page 6 for more
information.
Note: The LEDs can be dimmed by selecting an option in the WebConsole pages. See the System Management section on
page 30 for more information.
FIG. 4 displays the LEDs on the front panel.
FIG. 4
Front panel LEDs
Instruction Manual - NMX-ENC H.264 Encoder
LEDs
STREAM - shows streaming status
VIDEO IN - notes video input status
POWER - notes power and alarm state
USB - notes file copying state
Audio signal
strength indicators
Wiring and Device Connections
USB
ID
pushbutton
5