Overview; Specifications - AMX NMX-ENC-1100 Instruction Manual

Overview

The NMX-ENC H.264 encoder is an audio/video encoder which supports high-definition video and H.264 encoding
from sources including PCs, cameras, and set-top boxes. The encoder can stream either unicast and multicast streams.
The NMX-ENC is available in two different versions: NMX-ENC-1100 (FG3201-01) and NMX-ENC-1105
(FG3201-02). The NMX-ENC-1105 has the same features as the NMX-ENC-1100 and adds SDI input and pass-thru
ports on its rear panel.
FIG. 1 NMX-ENC H.264 encoder

Specifications

The following table lists the specifications for the NMX-ENC H.264 encoder:
NMX-ENC H.264 Encoder Specifications
Active Power Requirements
Power Connector:
Power Capabilities:
Front Panel Components
LEDs:
AUDIO IN:
USB:
ID:
Rear Panel Components
SDI:
MULTI FORMAT VIDEO
INPUTS:
AUDIO:
Instruction Manual - NMX-ENC H.264 Encoder
1 2-pin 3.5mm locking Phoenix connector
• Maximum Current Draw: 13W
• Typical Current Draw: 10W
• Operating Voltage: 10VDC to 18VDC
All LEDs appear in green (active) or red (alarm state).
• STREAM - shows streaming status
• VIDEO IN - notes video input status
• POWER - notes power and alarm state
• USB - notes data copying state
See the LEDs section on page 5 for more information.
2 sets of AUDIO IN LEDs indicating the signal strength of the audio input with
separate sets of indicators for the left (L) and right (R) channels. See the
AUDIO IN section on page 6 for more information.
1 Type-A USB connector. The port has an LED beside it which indicates the
state of sending data to a connected USB storage device. See the USB section
on page 6 for more information.
1 ID pushbutton to assign a device address to the encoder or copy a
configuration information file to a connected USB drive. See the ID section on
page 7 for more information.
These connectors are only available on the NMX-ENC-1105.
• 1 BNC connector for video input (INPUT)
• 1 BNC connector for video output (PASS THRU)
See the SDI section on page 8 for more information.
1 DVI connector for multi-format video inputs. See the MULTI FORMAT VIDEO
INPUTS section on page 9 for more information.
• 1 3.5mm mini-phono connector for audio input (INPUT)
• 1 3.5mm mini-phono connector for audio output (PASS THRU)
See the AUDIO section on page 10 for more information.
Overview
1