Front Wheel - Sym EuroMX 125 Service Manual

14. Steering/Front Wheel/Front Shock Absorber

Front Wheel

Removal
Support body bottom and lift front wheel free of
ground.
Remove the screw, and disconnect speedometer
cable from the gear box.
Remove the wheel axle nut and pull out the axle.
Then, remove the front wheel.
Caution
Do not operate the front brake lever to avoid
to pressing out the brake lining when
removing the master cylinder.
Inspection
Wheel axle
Set the axle in V-blocks and measure the run-out.
Service limit: 0.2 mm
Wheel Rim
Place the wheel onto a rotated bracket.
Turn the wheel with hand and measure its
wobble value with a dial gauge.
Service limit:
Radial : 2.0 mm
Axial : 2.0 mm
14-4
This Chapter Contents
Speedometer
cable
Wheel axle
nut
Wheel axle