Sym EuroMX 125 Service Manual page 186

This Chapter Contents
16. Electrical Equipment
Front Turn Signal Light Bulb Replacement
Remove the light outer cover of the turn signal
light. (screw x 2)
Remove the light inner cover of the turn signal
lamp. (screw x 1)
Replace the bulb with new one.
Rear Turning Signal Light Replacement
Pry out the light cover from the preset slot onto
the lower parts of cover.
Check if the bulb is burnt or damage, and replace
it if necessary.
Connect power to check if the bulb has been
installed properly after installation.
Preset slot
Taillight / Brake Light Replacement
Remove the outer cover of the tail & brake light.
(screw x 2)
Check if the bulb is burnt or damage, and replace
it if necessary.
Connect power to check if the bulb has been
installed properly after installation.
Screw x 2
16-17