Sym EuroMX 125 Service Manual page 70

Installation Of Engine
Check if the bushings of engine suspension
frame and shock absorber for damaged. If so,
replace with new ones.
Install the engine according to the reversing
order of removal.
Caution
Note both feet and hands safety for
squeezing as engine installation.
Do not bent or squeeze each wires or hose.
Route all cables and wires in accordance
with the routine layout.
Engine suspension nut:
Torque Value: 4.5~5.5 kgf-m
Rear shock absorber bolt:
Torque Value: Top: 3.5~4.5 kgf-m
Down: 2.4~3.0 kgf-m
Rear wheel axle nut:
Torque Value: 11.0~13.0 kgf-m
This chapter Contents
Nut x 1
Nut x1
5. REMOVAL OF ENGINE
5-9