Sym EuroMX 125 Service Manual page 64

Remove the spark plug.
Remove the engine temperature sensor
connector.
Caution
Open the latch located under the temperature
sensor before disconnect it so that the
connector can be pull out and not be
damaged.
Loose the throttle valve cable fixed nut and
remove the throttle valve cable.
Remove fuel hose, vacuum hose.
Disconnect auto by-starter line coupler.
This chapter Contents
Throttle valve cable
fixed nut
Auto by-starter
Vacuum hose
Auto by-starter line
5. REMOVAL OF ENGINE
Spark plug cap
Fuel hose
5-3