Sym EuroMX 125 Service Manual page 189

16. Electrical Equipment
Turn signal light switch
FROM R
N PUSH OFF
FROM L
Light
Wire color
blue
Horn
Remove the front fender.
Connect 12V power to the 2 pins on the horn.
Then, the horn should sound.
Replace it if necessary.
Brake light switch
The circuit of black wire and the green/yellow
wire on the brake light switch should be in
continuity when operating the brake lever.
If the switch damaged, replace it with new one.
16-20
This Chapter Contents
R WR L
● ●
● ●
● ●
●
●
Gray Orange
Turn signal light switch
Horn switch
Brake lamp switch