Advertisement

1. CONTENTS

1. Contents ...........................................................................................................1
2. Location of the safety label.............................................................................3
3. Control location ...............................................................................................5
4. Before riding ..................................................................................................10
5. Safe riding ......................................................................................................10
6. Riding ..............................................................................................................11
7. Use genuine spare parts ..............................................................................11
8. Use of each component ................................................................................12
Gauges ...........................................................................................................12
Operation of ignition switch ........................................................................13
Use of buttons ...............................................................................................14
Seat lock ........................................................................................................16
Safety helmet hook .......................................................................................16
Luggage box...................................................................................................16
Fuel tank cap .................................................................................................17
Side stand .......................................................................................................18
Brake ..............................................................................................................18
Parking method .............................................................................................18
9.
Important points and cautions for starting engine ....................................19
10.The best way to ride off ................................................................................20
The control of throttle valve handle ............................................................20
11.Inspection and maintenance before riding .................................................20
Routine inspection ........................................................................................20
Inspection of fuel level .................................................................................20
Inspection and replenishment of engine oil ...............................................21
Transmission oil inspection and change ...................................................21
Inspection and adjustment of brake free play ............................................22
Disc brake inspection [Depending on models] ..........................................23
1

Advertisement

Table of Contents
loading

Summary of Contents for Sym Jet Euro X 50

  • Page 1: Table Of Contents

    1. CONTENTS 1. Contents ......................1 2. Location of the safety label................3 3. Control location ....................5 4. Before riding ....................10 5. Safe riding ......................10 6. Riding ......................11 7. Use genuine spare parts ................11 8. Use of each component ................12 Gauges ......................12 Operation of ignition switch ................13 Use of buttons ....................14 Seat lock ......................16...
  • Page 2 Checking the spark plug ................28 Checking the air cleaner ................28 12.When there is an abnormal condition or a trouble ........29 Diagnosis when engine does not start ............29 13. Periodical Maintenance Schedule ............... 30 14. Specification ....................31 SYM USA200310...
  • Page 3: Location Of The Safety Label

    2. LOCATION OF THE SAFETY LABEL Handle rear cover Frame NO. cover Fuel tank cap...
  • Page 4 2. LOCATION OF THE SAFETY LABEL JET 50 MASK 50 RS-21 50 Luggage box DD 50 R Body cover...
  • Page 5: Control Location

    3. CONTROL LOCATION MODE:JET EURO 50 SERIES Eng. stop / Starter switch Fuel tank cap Rear turn signal Seat lock Front turn signal Rear turn signal Helmet hook High & Low beam / Turn signal / Horn switch Fuses / C.D.I. Eng.
  • Page 6 3. CONTROL LOCATION MODE:JET 50 SERIES Eng. stop / Starter switch Fuel tank cap Rear turn signal Seat lock Front turn signal Rear turn signal Helmet hook High & Low beam / Turn signal / Horn switch Fuses / C.D.I. Eng.
  • Page 7 3. CONTROL LOCATION MODE:MASK 50 SERIES Eng. stop / Starter switch Fuel tank cap Front turn signal Helmet hook High & Low beam / Turn signal / Horn switch Fuses / C.D.I. Eng. Oil tank cap Tail light Rear turn signal Head light Seat lock Luggage box...
  • Page 8 3. CONTROL LOCATION MODE:RS21 50 SERIES Eng. stop / Starter switch Fuses / C.D.I. Eng. Oil tank cap Fuel tank cap Front turn signal Helmet hook High & Low beam / Turn signal / Horn switch Seat lock Tail light Head light Rear turn signal...
  • Page 9 3. CONTROL LOCATION MODE:D.D 50 SERIES Eng. stop / Starter switch Helmet hook Rear turn Front turn signal signal High & Low beam / Turn signal / Horn switch Fuses / C.D.I. Eng. Oil tank cap Head light Fuel tank cap Tail light / Rear turn signal...
  • Page 10: Before Riding

    4. BEFORE RIDING This manual describes the correct usage of this scooter including safety riding, simple inspection methods and so on. For a more comfortable and safety riding, please read this manual carefully. Thank you very much for choosing a SANYANG scooter: In order to maximize your scooter’s performance, a periodic inspections and regular maintenance should be performed.
  • Page 11: Riding

    Also, it may result in unexpected troubles and lower the motorcycle’s performance. Always use SYM Genuine Spare Parts to keep your scooter pure blood and to ensure its long service life.
  • Page 12: Use Of Each Component

    8. USE OF EACH COMPONENT Gauges Model : MASK 50 SERIES Model : JET 50 SERIES Model :RS-21 50 SERIES Model : D.D. 50 SERIES CAUTION: Do not wipe plastic components, such as the instrument panel, the headlight, body covers, etc. with solvents, such as gasoline, etc.
  • Page 13: Operation Of Ignition Switch

    Use only 2-cycle engine oil meeting Japanese Automobile Standard Organization FC specifications. SANYANG will not assume responsibility for damages caused from using substandard engine oil. ※ Recommended oil: SYM EXTRA 2X oil. . Speedometer This shows your speed in kilometers per hour WARNING: (km/h) and in mileage per hour(mph).
  • Page 14: Use Of Buttons

    8. USE OF EACH COMPONENT OPERATION OF IGNITION SWITCH (D.D. 50) “ON” position Engine can be started in this position. Ignition switch key can not be removed. “OFF” position Engine is shut off and can not be started in this position. Ignition switch key can be removed.
  • Page 15 8. USE OF EACH COMPONENT • Engine Stop Switch “ON”: Switch to this position and the engine can be started. “OFF”: Switch to this position to turn off the engine when a state of emergency. CAUTION: If the scooter is stopped with the ignition switch in the ”ON” position and the engine stop switch in the “OFF”...
  • Page 16: Seat Lock

    8. USE OF EACH COMPONENT SEAT LOCK Unlock:(JET 50) Insert your ignition switch key into the lock on CAUTION: the center rear of the seat, and turn the key to Do not put the scooter key in the luggage com the right.
  • Page 17: Fuel Tank Cap

    8. USE OF EACH COMPONENT FUEL TANK CAP Mode: JET 50 . MASK 50 1. Insert ignition switch key into the lock on the fuel tank cap cover, and turn the key to the right, then the cover can be removed. 2.
  • Page 18: Side Stand

    8. USE OF EACH COMPONENT SIDE STAND Side stand is used for temporary parking, If you are going to park your scooter for a long while, please use, the main stand, WARNING: The scooters side stand is equipped with Auto-Return device.
  • Page 19: Important Points And Cautions For Starting Engine

    9. IMPORTANT POINTS AND CAUTIONS FOR STARTING ENGINE CAUTION: Check that the engine and fuel volumes are at adequate levels before starting the engine. When starting the engine the main stand must be firmly on the ground and the rear brake must be engaged.
  • Page 20: The Best Way To Ride Off

    10. THE BEST WAY TO RIDE OFF THE CONTROL OF THROTTLE VALVE HANDLE Turn on the turn signal light before moving, Deceleration and make sure no vehicle is coming from behind. Then, drive off. Acceleration During driving, attention should be paid to vehicles ahead and behind and keep highly alert at all times.
  • Page 21: Inspection And Replenishment Of Engine Oil

    Otherwise, this company will not assume any responsibility for damages resulted from using substandard engine oil. ※ Recommended oil: SYM EXTRA 2X oil. Replenishment: 1. Using the main stand to support the vehicle on a level ground, lift up the seat, and remove the oil tank cover.
  • Page 22: Inspection And Adjustment Of Brake Free Play

    11. INSPECTION AND MAINTENANCE BEFORE RIDING INSPECTION AND ADJUSTMENT OF BRAKE FREE PLAY INSPECTION: (Brake lever free play must be checked with the engine shut off.) Brake lever free play for front and rear wheels. When checking the hand-braking lever for front and rear wheels, its free play (the stroke of hand- braking lever from no braking to initial braking) should be 10~20mm.
  • Page 23: Disc Brake Inspection [Depending On Models]

    [Applicable for model equipped with disc brake.] Hose connection Visual Inspection for leakage or damage. If there is any, take your scooter to SYM Authorized Dealer or Franchised Dealer for a check or repair. Park the motorcycle on a level ground, and check if fluid level is under the “LOWER” mark.
  • Page 24: Throttle Valve Handle Clearance Adjustment

    11. INSPECTION AND MAINTENANCE BEFORE RIDING THROTTLE VALVE HANDLE CLEARANCE ADJUSTMENT Correct clearance allows throttle vale handle to rotate 2~6mm. To adjust, first loosen the fixing nut, then turn the adjusting nut to the proper position and securely tighten the fixing nut. 2~6 mm Lock nut Adjust nut...
  • Page 25: Steering Handle Front Shock Absorbers Inspection

    Check steering handle if it is being pulled too tight by the brake cables. Take your scooter to SYM Authorized Dealer or Franchised Dealer for a check or adjustment if any abnormal conditions are found.
  • Page 26: Inspection And Maintenance Of Battery

    INSPECTION AND MAINTENANCE OF BATTERY This scooter is equipped with a maintenance-free type battery, so it is unnecessary to check and add electrolyte. Have your scooter checked by SYM Authorized Dealer or Franchised Dealer should any abnormality is found. Remove the battery terminals and clean if there are dirt and corrosion on them.
  • Page 27: Checking And Changing Fuses

    11. INSPECTION AND MAINTENANCE BEFORE RIDING CHECKING AND CHANGING FUSES Turn off ignition switch, and check fuses if they are intact. Replace the blown fuse with a new one having the same specified amperage rating (7A). Using a fuse of more than 7 amperes, a brass or iron wire to replace a blown fuse is strictly prohibited to avoid damaging the electrical system and the circuit.
  • Page 28: Checking The Spark Plug

    11. INSPECTION AND MAINTENANCE BEFORE RIDING CHECKING THE SPARK PLUG Remove the cap of high tension cable. (Use a plug wrench in tool box to 0.6~0.7mm remove the spark plug by turning it counterclockwise.) Check the electrode if it is dirty or fouled by carbon deposits. Remove the carbon deposits on the electrode with steel wire, and clean the spark plug with gasoline, then, wipe dry with a rag.
  • Page 29: When There Is An Abnormal Condition Or A Trouble

    3. Is the rear or front wheel brakes being hold horn button. The fuse may blow if horn not when pressing starting button? sounding. 【Please go to SYM authorized dealer or franchised dealer immediately if there are no problems on above conditions and engine still can not be started.】...
  • Page 30: Periodical Maintenance Schedule

    The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever comes first. Have your scooter checked and adjusted periodically by your SYM Authorized Dealer or Franchised Dealer to maintain the scooter at the optimum condition.
  • Page 31: Specification

    14. SPECIFICATION Model JET EURO 50 JET 50-α MASK 50 RS21 50 D.D.50 Item Specification Length ( mm) 1780 1780 1835 1870 1660 Width ( mm) Height ( mm) 1125 1115 1125 1130 1020 Wheel base ( mm) 1275 1275 1280 1335 1155...

Table of Contents