Charging System - Sym EuroMX 125 Service Manual

Charging system

Charging wire circuit
Main switch
Battery
Charging
Connect the battery charger's positive (+)
terminal to battery's positive (+) post.
Connect the battery charger's positive (-)
terminal to battery's positive (-) post.
Standard
Charging current
Charging time
Warning
Strictly keep flames away from a charging
battery.
The charging ON/OFF is controlled by the
charger's switch. Do not control the
charging by battery jump wires.
Caution
Quick charge a battery should be used only
in an emergency.
Make sure the current and charging time of
above description.
The battery will be damaged by too much
current or too rush charging.
After installing the battery, coat the terminals with
clean grease.
This Chapter Contents
Fuse
10A
Max
0.9A 16.0A
5~10H 1H
16. Electrical Equipment
Alternator
Regulator
16-5